1. Intelligent process expert function
2. Intelligent operation expert function
3. After-sales service expert function.
1. Paper slitting machines are used to cut whole rolls or sheets of raw materials to a fixed length, such as plastic packaging materials, cardboard boxes, steel plates, films, leather, and wood chips. Fixed-length slitting control is essential for this purpose.
2. The slitting length can be continuously set. If there is an error in the actual slitting length, it can be easily calibrated by setting parameters.
3. Paper slitting machine slitting control is divided into two types: static and dynamic slitting. Static slitting occurs when the set length is reached, followed by static slitting, and then restarting. Dynamic slitting occurs when the set length is reached, without stopping the machine and issuing a slitting signal, allowing the slitting machine to perform dynamic slitting while the material is in motion. The paper tube slitting machine has a main shaft for processing paper tubes mounted in the middle. The front end of the main shaft is fixed to a base using a set of bearings, with a pulley installed in the middle of the bearing set. A compression cylinder is installed near the base, and a support rod bearing is installed at the upper end of the cylinder's support rod to support the main shaft.
A main cutter shaft is mounted at the top of the paper tube slitting machine, with several blades arranged at specific intervals on it. A support frame for the main cutter shaft is also located at the top of the machine, with a support cylinder installed in the middle of the support frame.
The structural advantages of the paper tube slitting machine fill a technological gap in fully automatic tube cutting machines.
